|
*Note: ORG is the acronym of the participant organisation. In case a participant is submitting results with more than one code or model, add lowercase letters a, b, c, … to the ORG acronym.
Preffered way to upload files is to group files into .zip archive.
Archives should be named as V1-ORG.zip (V1-ORGa.zip, V1-ORGb.zip, … if multiple variants are uploaded).
Files should be uploaded via upload page
in documents area.
Files should be marked with appropriate keyword (SBEP-V1).
Access group should be probably set to WP3.
SBEP-V1: Russian 2. Results to be reported by participants |
Contours based on experiment |
Further contours |
File name* and type of file |
V1.1 |
Description of the
model, including governing equations, initial and boundary
conditions for simulations, numerical details (solution method,
discretisation schemes, etc); what model parameters if any were adjusted to match
the experimental data. Used code and its version.
Description of the grid and/or picture of the grid
cross section in a vertical plane crossing vessel’s axis;
characteristic mesh sizes and the total number of control volumes
in the grid; effect of the grid size on simulation results;
Computer equipment used (operating system, CPU
number, type and clock speed, RAM) and CPU time, required for
simulations (for each different grid used).
|
-- |
-- |
V11-ORG.doc(MSWord file) |
V1.2 |
A picture (black-white) of hydrogen volume fraction (% vol) distribution
(contour lines) in the vertical cross-section of the vessel
crossing the vessels axis at 30 seconds from the beginning of the
release. |
N/A |
0.002, 0.005, 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.1 |
V12-ORG.jpg |
V1.3 |
A picture
(black-white) of hydrogen volume fraction (% vol) distribution
(contour lines) in the vertical cross-section of the vessel
crossing the vessels axis at 2 minutes after the end of the
release of hydrogen. |
0.007, 0.053, 0.04 |
0.01, 0.02, 0.03, 0.1 |
V13-ORG.jpg |
V1.4 |
A picture
(black-white) of hydrogen volume fraction (% vol) distribution
(contour lines) in the vertical cross-section of the vessel
crossing the vessels axis at 50 minutes after the end of the
release of hydrogen. |
0.0025, 0.01, 0.035, 0.04 |
0.025, 0.03, 0.1 |
V14-ORG.jpg |
V1.5 |
A picture
(black-white) of hydrogen volume fraction (% vol) distribution
(contour lines) in the vertical cross-section of the vessel
crossing the vessels axis at 100 minutes after the end of the
release of hydrogen. |
0.005, 0.015, 0.027, 0.035 |
0.03, 0.04 |
V15-ORG.jpg |
V1.6 |
A picture
(black-white) of hydrogen volume fraction (% vol) distribution
(contour lines) in the vertical cross-section of the vessel
crossing the vessels axis at 250 minutes after the end of the
release of hydrogen. |
0.01, 0.016, 0.02 |
0.025, 0.03, 0.04 |
V16-ORG.jpg |
V1.7 |
A picture
(black-white) of hydrogen absolute velocity (m/s) distribution
(contour lines) in the vertical cross-section of the vessel
crossing the vessels axis at 30 seconds from the beginning of the
release of hydrogen. |
N/A |
0.01, 0.015, 0.02, 0.03, 0.04, 0.05, 0.07, 0.1, 0.5 |
V17-ORG.jpg |
V1.8 |
A table (space
delimited) with absolute velocity (m/s) distribution along the
vessel’s centreline at heights from 0 to 5.5 m at time
30 seconds from the beginning of the release. |
-- |
-- |
V18-ORG.txt(ASCII file) containing two columns: height along the axis (m)
and velocity values (m/s) |
V1.9 |
A table (space
delimited) with volume fractions (% vol) at L1-L6
along vessel’s centreline for times 2, 50, 100, 250 min
after the end of the release of hydrogen. |
-- |
-- |
V19-ORG.txt
(ASCII file) containing five columns: distance of points L1,
… L6 from the top of the vessel (m) and volume
fractions (% vol) for times 2, 50, 100 and 250 min |
V1.10 |
Video animations of the whole gas distribution transient (optional). |
-- |
-- |
V110-ORG.mpg, avi or vmf (Try to reduce file size at the maximum level not
to lose quality of information) |
|